MécaTech NCH Oil Flush

NCH OIL FLUSH

MT024

Effectively and safely cleans the entire engine oil lubrication system

• Removes varnish deposits, black and white sludge
  
• Intensively cleans lifters and chain tensioners, restoring their function
• Stabilizes compression end pressure
• Optimizes oil pump operation and oil pressure
• Neutralizes acid and combustion residues
• 300ml

INSTRUCTIONS FOR USE

For maintenance and light contamination

• Add MécaTech NCH Oil Flush to the old engine oil. One 300ml dose is sufficient for up to 6 liters of crankcase content.
• Run the engine for at least 15 minutes at increased RPM (1,500-2,000 rpm), or take a test drive. Treatment time/test drive may exceed 15 minutes (ample).
• Drain the oil while warm, replace the oil filter, and use the prescribed oil.

For heavy contamination

• Visual inspection, In case of extreme contamination; disassemble the valve cover, timing cover, and oil pan and clean them manually. This also provides the opportunity to check parts for wear and/or damage before cleaning. If in doubt, contact your technical advisor.
• Add 1x MécaTech NCH Oil Flush (per 6 liters of oil) to the old engine oil. Drive at least 300 km before changing the oil.

Please note!

Mécatech NCH Oil Flush does not contain solvents and is therefore safe to use, even with a wet timing belt. However, it should be checked beforehand to ensure it is not already swollen or torn.