COBRA Hybrid Flush 2

COBRA HYBRID FLUSH-2

CBO-356

DESCRIPTION.

Hybrid Flush-2 is an additional additive for the Mécatech Flush accelerator with very specific properties when white sludge is present. Hybrid Flush-2 reliably binds and removes condensation water and moisture from the entire oil system. The combination of Mécatech Flush accelerator and Cobra Clean Hybrid Flush-2 frees the oil system from moisture and restores the operation of the crankcase ventilation. Hybrid Flush-2 protects the engine against rust and corrosion and improves the lubricating effect of the oil system.

Reliably removes condensation water from the entire oil system. Restores the operation of crankcase ventilation. Protects against rust and corrosion. Always use Cobra Clean step-by-step for a safe and effective method. Always use Hybrid Flush-2 in combination with Mécatech Flush accelerator. Hybrid Flush-2 is compatible with all types of engines. Binds condensation moisture from the oil. 200ml.

INSTRUCTIONS FOR USE

1. Always use Hybrid Flush-2 in combination with Mécatech Flush accelerator for the best results.
2. Set the oil level to MIN.
3. Add 300 ml of Mécatech Flush accelerator to the old oil. 300 ml of Mécatech Flush accelerator is sufficient for up to 6 liters of engine oil.
4. Let the engine idle at an increased speed for one hour.
5. It is advised not to drive the car.
6. Then add 200 ml of Hybrid Flush-2 to the old oil. 200 ml of Hybrid Flush-2 is sufficient for up to 6 liters of engine oil.
7. Let the engine run for another hour without load.
8. Always replace the oil and oil filter after the Flush.

TIP!

For use against White Sludge:

For the correct procedure, see Cobra Clean step by step no. CBS-300-003

For use against ticking tappets:

For the correct procedure, see Cobra Clean step by step no. CBS-300-002